Modular type air cooled water chiller & heat pump

Short Description:

Advantages:   ■ Modular design, single unit cooling capacity range from 30kw-130kw, users choose N(1~10)to realize parallel connection.   ■Units with V type heat exchanger: panels, frame and base are made from galvanized steel protected with polyester powder painting to ensure total resistance to atmospheric agents.   ■Units with U type heat exchanger: bearing structure in aluminum, panels in stainless steel, 3-phase scroll type compressor, with built-in thermal overload cut-out and crank-...


  • FOB Price: US $0.5 - 9,999 / Piece
  • Min.Order Quantity: 100 Piece/Pieces
  • Supply Ability: 10000 Piece/Pieces per Month
  • Product Detail

    Product Tags

    IMG_20190221_082516

    Advantages:
     
    ■ Modular design, single unit cooling capacity range from 30kw-130kw, users choose N(1~10)to realize parallel connection.
     
    ■Units with V type heat exchanger: panels, frame and base are made from galvanized steel protected with polyester powder painting to ensure total resistance to atmospheric agents.
     
    ■Units with U type heat exchanger: bearing structure in aluminum, panels in stainless steel, 3-phase scroll type compressor, with built-in thermal overload cut-out and crank- case heater, mounted on rubber vibration damper.
     
    ■ External rotor type axial fans, equipped with three phase direct drive motors, low noise 8 poles, protection level IP54, provided with a protective outlet grille.
     
    ■ Evaporator built with high efficiency tube in tube type heat exchanger, factory insulated with flexible close cell material.
     
    ■ Condenser built with seamless copper tubes mechanically expanded into hydrophilic aluminum fins.
     
    ■ Refrigerant circuit complete with charge valves, filter drier, sight glass, gas-liquid separator, thermostatic expansion valve, high & low pressure switch. The heat pump unit is completed also with 4-way valve, liquid receiver and one way valve.
     
    ■ Hydraulic circuit built with galvanized pipe, complete with water discharge connection for tube in tube heat exchanger and flange type hydraulic connectors in two directions easy for
     

    Model FM-30R FM-35R FM-55R FM-65R FM-100R FM-130R
    Cooling capacity(kW) 28 33 56 65 95 130
    Heating capacity(kW) 30 35 59 70 105 140
    Power input In  cooling(kW) 9 10 18.70 21 32 42
      In heating(kW) 9 9.5 18.0 19.5 29 39
    Compressor Scoll
    Refrigerant R407C/R410A
    Power 380V/50Hz/3P
    Safety Protections  high/low pressure protection, over load protection, phase protection, under-voltage protection,waterflow switch protection,anti-freeze protection etc.
    Water-side Heat Exchanger Type Shell in tube type/ tube in tube type
    Water pressure drop(kPa) 43-45
    Water side working pressure(MPa) 1.0
    Pipe dim(DN) 50 65 80
    Water flow in cooling(m3/h) 4.8 5.6 11.2 11.2 16.5 22.4
    Air side Heat Exchanger Type Hydrophilic aluminum fin
    Fan number 1 1 2 2 3 4
    Dimension L(mm) 1150 1150 2100 2100 2980 2100
    W(mm) 660 660 1060 1060 1060 2050
    H(mm) 1900 1900 2090 2090 2090 2090
    Weight Shippment weight(kg) 500 500 700 700 1100 1350

     
    1150*660*1900
    2100*1060*2090
     
    Notes:
    * Cooling Condition: Ambient temperature 35ºC; evaporator water in/out 12/7 ºC;
    ** Heating Condition: Ambient temperature WB 7 ºC, DB 6 ºC; condenser water in/out temperature 40/45 ºC;
    *** Power supply: 3P-380V-50HZ;with voltage allowance ±10%,voltage difference between the phase lines±2%
       
     Total heat recovery unit  
     
     

    Model FM-30RQ FM-35RQ FM-55RQ FM-65RQ FM-100RQ FM-130RQ  
    Cooling capacity(kW) 28 33 56 65 95 130  
    Heating capacity(kW) 30 35 59 70 105 140  
    Power input In  cooling(kW) 9.3 10.5 19.5 22.5 34 43  
      In heating(kW) 9.5 11 20 23 35 46  
    Rated heat recovery(kW) 37 43 75 86 129 172  
    Rated water produced speed(L/h) 795.5 925 1612.5 1849 2774 3698  
    Compressor Scroll type  
    Refrigerant R407C/R410A  
    Power 380V/50Hz/3P  
    Safety Protections  high/low pressure protection, over load protection, phase protection, under-voltage protection,waterflow switch protection,anti-freeze protection etc. Safety Protections
    Air side Heat Exchanger Type Hydrophilic aluminum fin
    Fan number 1 1 2 2 3 4  
    Refrigerant water side heat exchanger Type Shell in tube type/ tube in tube type
    Cold water flow t/h 4.8 5.7 9.6 11.2 16.3 22.4  
    L/min 80 95 160 187 270 374  
    Water pressure drop(kPa) 35 35 45 45 45 90  
    Pipe dim(DN) DN40 DN40 DN50 DN50 DN65 DN65  
    Hot water side heat exchanger Type Shell in tube type/ tube in tube type
    Hot water flow t/h 6.4 7.4 12.9 14.79 22.18 29.58  
    L/min 107 123 215 247 370 494  
    Water pressure drop(kPa) 35 35 40 40 40 80  
    Pipe dim(DN) 40 40 50 50 65 50  
    Dimension L(mm) 1150 1150 2100 2100 3070 2345  
    W(mm) 680 680 1055 1055 1055 2042  
    H(mm) 1900 1900 2055 2055 2055 2065  

     
    Notes:
    * Cooling Condition: Ambient temperature 35ºC; evaporator water in/out 12/7 ºC;
    ** Heating Condition: Ambient temperature WB 6ºC, DB 7ºC; condenser water in/out temperature 40/45 ºC;
    ***hot water condition:hot water temperature inlet/outlet difference 5ºC;Ambient temperature DB 20ºC, hot water tank initial temperature 15℃, highest temperature 55℃
    **** Power supply: 3P-380V-50HZ;with voltage allowance ±10%,voltage difference between the phase lines±2%


  • Previous:
  • Next: